| 0 | 2″ Nylon Roller – Standard | 3228-2 |
| 1 | Top Panel Seal Only – #5463 Top Seal | 7534 |
| 1 | Top Panel Complete – #5463 Top Seal, #1920 Top Bracket Mounting Plates | 7534-1 |
| 2 | Intermediate Panel – 15-5/16″ High | 6248 |
| 2 | Intermediate Panel – 13-5/16″ High | 6249 |
| 3 | Bottom Complete With Lock – 15-5/16″ High (#77 Standard) | 7545-1 |
| 3 | Bottom Complete With Lock – 13-5/16″ High (#77 Standard) | 7545 |
| 3 | Bottom With Hardware Less Lock – 15-5/16″ High | 7544-1 |
| 3 | Bottom With Hardware Less Lock – 13-5/16″ High | 7544 |
| 3 | Bottom With Seal Only – 15-5/16″ High | 7543-1 |
| 3 | Bottom With Seal Only – 13-5/16″ High | 7543 |
| 4 | 2″ Horizontal Track – 10″ Radius – 90 Degree – Curbside | 11-4 |
| 4 | 2″ Horizontal Track – 8″ Radius – 90 Degree – Curbside | 11-2 |
| 5 | 2″ Horizontal Track – 8″ Radius – 90 Degree – Roadside | 11-3 |
| 5 | 2″ Horizontal Track – 10″ Radius – 90 Degree – Roadside | 11-5 |
| 6 | Vertical Track & Angle Assembly – Curbside (#1796, #1031) | 2268 |
| 7 | Vertical Track & Angle Assembly – Roadside (#1796, #1031) | 2269 |
| 8 | Vinyl Side Seal | 7470/115 |
| 8 | Brush Side Seal Assembly (#5833 Brush Seal, #6590 Seal Retainer) | 6589 |
| 8 | Vinyl Side Seal | 7470/93 |
| 8 | Vinyl Side Seal | 7470/100 |
| 9 | Cotter Pin 1/8 X 3/4″ (For #5803 Cable Anchor) | 10-1009-7 |
| 9 | Cotter Pin 1/8 X 3/4″ Stainless Steel (For #5803 Cable Anchor) | 10-1009-19 |
| 10 | Cable Anchor – Surface Mounted (Clevis & Cotter Pins Required) Top Coated Black Enamel | 5803BLK |
| 11 | Clevis Pin 5/16 X 1″ Stainless Steel (For #5803 Cable Anchor) | 10-1004-5 |
| 11 | Do Not Move Decal – Premasked | 232361 |
| 12 | Bottom Seal Vinyl Snap-in (For #7146) | 7147 |
| 13 | Aluminum Bottom Channel (For #7147) | 7146 |
| 13 | Pull Down Strap – Top Coated Black Enamel (For Doors up to 96″) (copy) | 9723BLK (copy) |
| 14 | Pull Down Strap – Top Coated Black Enamel (For Doors up to 96″) | 9723BLK |
| 15 | Grab Handle Top Coated Black Enamel | 1715BLK |
| 16 | Lock Assembly With Inside Operating Release Handle – No Keeper Top Coated Black Enamel | 3224BLK |
| 16 | Lock Assembly With Fallaway Cam Inside Recessed Pull Handle – No Keeper Top Coated Black Enamel | 8757BLK |
| 16 | Lock Assembly With Fallaway Cam Inside Screw Release Handle – No Keeper Top Coated Black Enamel | 5677BLK |
| 17 | Keeper Assembly With Inside Operation Release Handle Top Coated Black Enamel (For #3224) | 7535-2BLK |
| 17 | Lock Assembly Only – Standard Outside Offset Cam (Without #7515 Keeper) Top Coated Black Enamel | 77-1BLK |
| 17 | Lock Assembly Only – Standard Outside Cam (Without #7515 Keeper) Top Coated Black Enamel | 77BLK |
| 19 | Rivet, Stainless Steel 1/4 X 1-7/8 X 3/4″ Head (For Grab Handle,Top Bracket) | 10-1002-32 |
| 20 | Rivet, Stainless Steel 1/4 X 2-1/8 X 1/2″ Head (For Strap, Lock Assy) | 10-1002-38 |
| 20 | Latch Plate – Standard (For All Non Slam Type Lock Assemblies) | 2804 |
| 21 | Keeper Assembly Top Coated Black Enamel (For #77, #77-1, #5677, #8757) | 7515BLK |
| 21 | Rivet, Stainless Steel 1/4 X 2 X 1/2″ Head (For Lock, Keeper, Cable Anchor) | 10-1002-33 |
| 22 | Clevis Pin 5/16 X 1″ (For #5803 Cable Anchor) | 10-1004-1 |
| 23 | Spacer Shim Under Top Mounting Bracket | 5628 |
| 25 | Self Locking Nut (1/4 – 20) | 10-1022-1 |
| 27 | Roller End Hinge Assembly – Complete (#1207, #1208, #10-1022-1) | 1209 |
| 28 | Roller End Hinge Cover | 1208 |
| 29 | Roller End Hinge | 1207 |
| 30 | Center Hinge | 15 |
| 32 | Spacer Washer (For First & Last Panel Joint Rollers) | 6 |
| 33 | 2″ Steel Roller – 5″ Shaft | 2996-3 |
| 33 | 2″ Steel Roller – Stainless Steel 3″ Shaft | 2996-2 |
| 33 | 2″ Nylon Roller – Shielded | 3228-1 |
| 33 | Top Closure Bracket – Curbside (For 10″ Radius Horizontal Track) | 1336-1 |
| 33 | Steel Roller, With 3″ Shaft | 2996 |
| 33 | 2″ Nylon Roller – Stainless Steel 3″ Shaft | 3228-3 |
| 34 | Top Closure Bracket – Roadside (For 8″ Radius Horizontal Track) | 1336-4 |
| 34 | Top Closure Bracket – Roadside (For 10″ Radius Horizontal Track) | 1336-2 |
| 34 | Top Closure Bracket – Curbside (For 8″ Radius Horizontal Track) | 1336-3 |
| 35 | Top Closure Mounting Bracket | 1920 |
| 38 | Balancer Assembly – Complete (Without Brackets & Clamp) | 2376 |
| 39 | Balancer Bracket – Roadside – (For use with 2376 balancer) | 2524 |
| 40 | Balancer Bracket – Curbside – (For use with 2376 balancer) | 2523 |
| 41 | Balancer Bracket – Center – (For use with 2376 balancer) | 2525 |
| 42 | Balancer Clamp – Center (For #2376, #7176) | 2526 |
| 43 | Self Locking Nut Stainless Steel 5/16-18 Thread (For #10-1003-150 Bottom Bracket) | 10-1063-4 |
| 44 | Balancer Shaft (For #2376, #7176) | 2528 |
| 45 | Cable Drum and Bearing Assembly – Roadside (Stamped 2901) – (For use with 2376 balancer) | 2547 |
| 46 | Cable Drum and Bearing Assembly – Curbside (Stamped 2902) – (For use with 2376 balancer) | 2548 |
| 47 | Winding Cone (For use with 2376 Balancer) | 2518COM |
| 48 | Spring Spacer (Relaxed Spring Length + 4-1/4″ For #2376) | 2471 |
| 49 | Torsion Spring – 2 3/16″ Inside Diameter – Roadside – Left Hand Wound – (For use with 2376 balancer) | 2704 |
| 50 | Torsion Spring – 2 3/16″ Inside Diameter – Curbside – Right Hand Wound – (For use with 2376 balancer) | 2705 |
| 51 | Thrust Washer (For #2376, #7176) | 2522 |
| 52 | Cotter Pin 3/16 X 1-1/2″ (For #2376, #7176) | 10-1009-8 |
| 54 | 2″ Rubber Track Stop Bumper | 83 |
| 56 | Cable Assembly Stainless Steel 5/16″ Eye-110″ (For Doors Up To 96″ High) | 1-11 |
| 56 | Cable Assembly Stainless Steel 5/16″ Eye-130″ (For Doors 96 To 119″ High) | 1-4 |
| 57 | Inter Section Seal | 2501-0 |
| 57 | Set Screw 3/8-16 Thread X 5/8″(For #2518) | 2699 |
| 63 | Top Brush Assembly (#5843 Brush Seal,#7271 Seal Retainer) | 8535 |
| 63 | Bottom Roller Bracket (#5600 Bracket Assembly) | 5509 |
| 63 | Top Seal And Cap Vinyl | 5463 |
| 64 | End Cap (For 13-5/16″ Panel) | 5453-1 |
| 64 | Wear Plate (For #5600) | 5504 |
| 64 | End Cap (For 15-5/16″ Panel) | 5453-2 |
| 65 | Bottom Roller Cover (#5600 Bracket Assembly) | 5502 |
| 66 | Bottom Bracket Assembly – Complete (#5502, #5509, #5504, #10-1063-1) | 5600 |
| 68 | Stainless Steel Washer (For #10-1010-43 Bottom Bracket) | 10-1006-27 |
| 70 | Bolt Stainless Steel 5/16-18 X 2-1/2″ (For Bottom Roller Bracket) | 10-1010-42 |
| 71 | Reinforcement Channel – 5″ (For Top Panel End Under Top Closure Mounting Bracket) | 7420 |
| 72 | Reinforcement Plate (For Lock And Grab Handle Inside Of Bottom Panel) | 7857 |
| 73 | Reinforcement Plate (For Lock Keeper Inside Of Bottom Panel) | 8809 |
