
Liftgate repair & service · Hunts Point, Bronx: Lift. Lower.
Repeat.
Sales, installation, repairs, welding and preventative maintenance for every major liftgate brand, from a family that has been building truck bodies since 1913.
Liftgate triage
What’s wrong with your liftgate?
Pick what it’s doing. We’ll show you where we’d look first and get you booked in.
Where we’d look first
- Power pack
- Cylinders
- Hoses & valves
- Wiring & switches
- Platform
- Pins & hinges
- Welds & frame
Waiting on you
Pick a symptom
Choose what your gate is doing and the schematic lights up the parts we’d check first. Not sure? Call us and describe it.
Sounds like a job for
Diagnostics & hydraulic repair
No lift usually points to the power side or the hydraulics. We check the power pack, the switches, solenoid and cables that feed it, and the cylinders, then tell you straight what it needs.
Sounds like a job for
Hydraulic repair
A platform that creeps down under load isn’t holding pressure. We look at the cylinders, valves and hoses, and repair or replace worn cylinders for smooth, consistent lift.
Sounds like a job for
Diagnostics & maintenance
Sluggish cycles can come from tired fluid, a worn pump and motor, or weak power reaching the pack. A full inspection tells us which. A hydraulic flush and oil change is part of our maintenance package.
Sounds like a job for
Hydraulic repair
Hydraulic fluid under the truck means a hose, fitting, seal or cylinder is letting go. We find the source, fix it, and leak-check the rest of the system.
Sounds like a job for
Structural repair
Platforms that bind or stick usually come down to pins, hinges, pivot points or alignment. We inspect, lubricate, replace worn hardware and run a full operational and alignment check.
Sounds like a job for
Electrical repair
Dead controls, or a gate that only works some of the time, points to the electrical side: switches, solenoids, wiring and controls. We trace the fault and get the system responsive again.
Sounds like a job for
Structural repair & welding
Bent platforms, cracked welds and worn hardware are everyday work here. We weld in-house, and replace pins, hinges, platforms and hardware when a repair isn’t the right call.
Sounds like a job for
Sales & installation
There are hundreds of makes and models, each with its own capacity and use. We help you pick the right gate for your truck, job and budget, then custom-fit and install it to the manufacturer’s guidelines.
Sounds like a job for
Preventative maintenance
Our preventative maintenance package: a full hydraulic flush and oil change, inspection of every major component, leak check and lubrication, an operational and alignment check, and a damage assessment.
A starting point, not a diagnosis. Every gate gets a hands-on look before we recommend a repair.
Where we’d look first
- Power pack
- Cylinders
- Hoses & valves
- Wiring & switches
- Platform
- Pins & hinges
- Welds & frame
Waiting on you
Pick a symptom
Choose what your gate is doing and the schematic lights up the parts we’d check first. Not sure? Call us and describe it.
Sounds like a job for
Diagnostics & hydraulic repair
No lift usually points to the power side or the hydraulics. We check the power pack, the switches, solenoid and cables that feed it, and the cylinders, then tell you straight what it needs.
Sounds like a job for
Hydraulic repair
A platform that creeps down under load isn’t holding pressure. We look at the cylinders, valves and hoses, and repair or replace worn cylinders for smooth, consistent lift.
Sounds like a job for
Diagnostics & maintenance
Sluggish cycles can come from tired fluid, a worn pump and motor, or weak power reaching the pack. A full inspection tells us which. A hydraulic flush and oil change is part of our maintenance package.
Sounds like a job for
Hydraulic repair
Hydraulic fluid under the truck means a hose, fitting, seal or cylinder is letting go. We find the source, fix it, and leak-check the rest of the system.
Sounds like a job for
Structural repair
Platforms that bind or stick usually come down to pins, hinges, pivot points or alignment. We inspect, lubricate, replace worn hardware and run a full operational and alignment check.
Sounds like a job for
Electrical repair
Dead controls, or a gate that only works some of the time, points to the electrical side: switches, solenoids, wiring and controls. We trace the fault and get the system responsive again.
Sounds like a job for
Structural repair & welding
Bent platforms, cracked welds and worn hardware are everyday work here. We weld in-house, and replace pins, hinges, platforms and hardware when a repair isn’t the right call.
Sounds like a job for
Sales & installation
There are hundreds of makes and models, each with its own capacity and use. We help you pick the right gate for your truck, job and budget, then custom-fit and install it to the manufacturer’s guidelines.
Sounds like a job for
Preventative maintenance
Our preventative maintenance package: a full hydraulic flush and oil change, inspection of every major component, leak check and lubrication, an operational and alignment check, and a damage assessment.
A starting point, not a diagnosis. Every gate gets a hands-on look before we recommend a repair.
All major makes
Whatever’s on the back of your truck.
We sell, install, service and repair liftgates from all major manufacturers, and refurbish nearly any type or brand. Tap a make to book it in.
MaxonBook Maxon liftgate service
WaltcoBook Waltco liftgate service
Tommy GateBook Tommy Gate liftgate service
DhollandiaBook Dhollandia liftgate service
LeymanBook Leyman liftgate service
ThiemanBook Thieman liftgate service
PalfingerBook Palfinger liftgate service
AnthonyBook Anthony liftgate service
Every style
- Pickup
- Flipaway
- Cantilever
- Slider
- Rail gate
- Tuckaway
- Conventional
- Bottle gas
Every duty
- Medium-duty
- Heavy-duty
- High-cycle
- Dock-friendly
Brand names and logos are trademarks of their respective owners and are shown to identify what we service.
Complete liftgate service
One shop.
Every part
of the job.
From pickup and flipaway gates to cantilever, slider and rail gates, medium-duty to high-cycle. Whether it’s a quick fix or a full installation, we get it done right the first time.
Book service- 01
Sales & installation
Hundreds of makes and models, each with its own lift capacity and use case. We know today’s leading brands, help you choose the gate that fits your truck, application and budget, then custom-fit and install it in strict accordance with the manufacturer’s guidelines.
- Options for nearly every budget
- Backed by the manufacturer’s warranty
- 02
Repairs & welding
Accurate diagnostics and dependable repairs for nearly any liftgate problem, on every major brand. We keep a large inventory of common replacement parts, so many repairs are done on the spot. If a specialty part is needed, we source it quickly to cut your downtime.
- Expert welding
- In-house at our Hunts Point shop
- 03
Preventative maintenance
A scheduled service that heads off unexpected downtime and costly emergency repairs: hydraulic flush, full inspection, leak check, lubrication, alignment and a damage assessment.
See the package - 04
Refurbishing
We refurbish liftgates of nearly any type or brand, restoring a used gate to reliable working condition at a fraction of the cost of a new one.
Ask about refurbishing - 05
Transfers
New truck, good gate? We handle the professional removal and reinstallation, so a working liftgate moves onto your new vehicle.
Plan a transfer - 06
Replacement parts
Parts sales for all major brands, and the same parts we fit in the shop.
- Power packs
- Hydraulic cylinders
- Switches, solenoids & wiring
- Pins, hinges & platforms
On the job
Honest advice. Hands-on work.
Our reputation is built on honest advice, top-quality workmanship, fair pricing and dependable results. It’s why most of our liftgate business comes from repeat customers and referrals.
We do liftgate repair for the Bronx, Brooklyn, Queens and the rest of New York City, plus nearby cities and surrounding states. Bring your truck or trailer to the shop for in-house repairs and service.
The same shop also handles roll-up and swing door repair for box trucks, and lines cargo vans with VANSHIELD® fiberglass and insulation.


Preventative maintenance package
Have you serviced your liftgate lately?
Regular maintenance keeps a lift gate safe and efficient. It prevents unexpected downtime, heads off costly emergency repairs and extends the life of the gate.
Small repair or full rebuild
- Replacement power packs
- Restore reliable lifting power with new, OEM-quality hydraulic units.
- Hydraulic cylinders
- Repair or replace worn cylinders for smooth, consistent lift.
- Electrical components
- Switches, solenoids, wiring and controls that keep the system responsive.
- Structural repairs & parts
- Pins, hinges, platforms and hardware for long-lasting durability.
What’s included
Hydraulic flush
Complete hydraulic system flush and oil change
Full inspection
Electrical components, hoses, valves, pump and motor assembly, cylinders and welds
Leak check & lube
Leak check, plus lubrication of pins, pivot points and rails
Operational check
Full operational and alignment check for proper lift gate function
Damage assessment
With repair recommendations, if needed
Schedule your liftgate service
Keep it cycling.
Tell us what’s going on and we’ll set up a time. You’re welcome to bring the truck to the shop, and we’ll take it from there.
- Call the shop(718) 328-4200
- Bring the truck in448 Casanova Street, Bronx, NY 10474 (opens Google Maps)
- Need a full quote?Use the detailed quote form
Request received
Thanks.
Your request is in. The shop will be in touch to confirm the details. If it’s urgent, call (718) 328-4200.
Preview build: forms aren’t connected yet, so nothing was sent.
